Erratic operation, Appendix, Remote doesn’t work – LG 26LH1DC5 User Manual
Page 70: Normal picture, poor or no sound, No information available display, Installer menu setup
![background image](/manuals/167652/70/background.png)
70
APPENDIX
APPENDIX
Remote Control
Picture Reception
Broadcast Tuning Mode Digital Channel OSD
*Note: For other problems not caused by the 26LH1DC3/4/5, refer to other devices’ operating guide.
Remote not in TV mode.
Not aimed at IR remote
sensor.
8
Use Mode key to select TV; puts remote into 26LH1DC3/4/5 mode.
Weak batteries.
8
Replace batteries.
Wrong battery polarity.
8
Check that “+” and “-” match in battery compartment.
Too much light in room.
8
Dim room light.
Incorrect Bed 1-2 setting.
8
Set correct Bed 1-2 setting.
8
Point remote at TV’s IR receiver on TV.
Remote too far from IR
sensor.
Remote too far from IR
sensor.
8
Move remote closer to TV’s IR receiver or darken room.
IR path to TV’s receiver
obstructed.
8
Remove obstructions.
Wrong Installer remote
control.
8
Requires compatible Installer remote, contact your LG dealer.
Remote doesn’t work.
8
Press MUTE or use Volume Up key to increase sound level.
Audio muted.
8
Try a different channel.
Broadcast problem.
8
Turn TV speakers on.
TV Speakers Off.
Normal picture, poor or no sound.
8
Set Item 103 to 0 for information to be added to virtual channel tuning digital OSD.
Item 103 set to 1 physical
channels tuning.
No Information available display.
Erratic Operation
8
Adjust Installer menu settings as required.
8
Remove TV power cord for 15 seconds.
Wrong Installer menu
settings.
Software problem.
Installer menu setup.