Using the gas surface burners – LG Gas Range LRG3093ST User Manual

Page 10

Advertising
background image

10

O P E R AT I N G I N S T R U C T I O N S

USING THE GAS SURFACE BURNERS

Throughout this manual, features and appearance may vary from your model.

Make sure all grates on the range are properly

placed before using any burner.

Be sure the burners and grates are cooled down

before you place your hand, a pot holder, cleaning
cloths or other materials on them.

Make sure all burners are in place.

• DO NOT operate the burner for an extended period

of time without cookware on the grate.
The finish on the grate may chip without cookware
to absorb the heat.

HOW TO LIGHT A GAS SURFACE BURNER

Be sure all the surface

burners are placed in their
respective positions.

Push the control knob in

and turn it to the “LITE”
position.

You will hear a little

clicking noise— the
sound of the electric
spark igniting the burner.

To control the flame size, turn the knob. If the knob

stays at “LITE”, it will continue to click.

When turning a burner to “LITE”, all the burners

spark. Do not attempt to disassemble or clean
around any burner while another burner is on. An
electric shock may result, which could cause you to
knock over hot cookware.

IN CASE OF POWER FAILURE

In case of a power failure, you can light the gas
surface burners on your range with a match.
Hold a lit match to the burner, then push in and turn
the control knob to the “LITE” position. Use extreme
caution when lighting burners this way.

Surface burners in use when an electrical power
failure occurs will continue to operate normally.

SEALED GAS BURNERS

Your gas range
cooktop has five
sealed gas burners.
They offer
convenience,
cleanability and
flexibility to be used
in a wide range of
cooking applications.

The smallest burners
are in the right rear
position.

This burner can be
turned down to a low
simmer setting.
It provides precise cooking performance for delicate
foods such as sauces or foods that require low heat
for a long cooking time.

The medium (left rear) and the large (left front)
burners are the primary burners for most cooking.
These general-purpose burners can be turned down
from “HI” to “LO” to suit a wide range of cooking
needs.

The extra large burner (right front) is the maximum
output burner. Like the other four burners, it can be
turned down from “HI” to “LO” for a wide range of
cooking applications.

This burner is also designed to quickly bring large
amounts of liquid to a boil. It can be used with
cookware 10 inches or larger in diameter.

The oval burner (center) is for use with a griddle or
oval pots.

NOTE: The right front burner, by design, is raised up
from the cooktop. This is normal.

Push the control knob in and
turn it to the “LITE” position.

Medium

Large

Oval

Extra Large

Small

Advertising
This manual is related to the following products: