La Crosse Technology Weather Direct WD-3312 - Manual (Page 10)

Version 1.0 - 11/7/2008
Page 10 of 25
• Time and Date Set Automatically
• Low Battery Indicator on the LCD and the web site for the Wireless
Display and Outdoor Sensors
• Expansion
Options:
1. View Up To Five Forecast Locations on the Wireless Display
2. Receive Severe Weather Alerts
Time Setting on Wireless Display
The Time Zone you select
on
www.weatherdirect.com
for your Wireless Display is
intended to set the time for
your physical location so
the clock on your Wireless
Display is accurate. This
time is independent of your
selected forecast locations.
The Wireless Display will
ONLY display the time from
the “Time Zone for Wireless
Display Clock” set on the
web site, NOT the time at
the forecast locations.
There is only one Time
Zone available per Wireless
Display.
The Daylight Saving Time (DST) checkbox on your Wireless Display settings at
www.weatherdirect.com is selected by default because most locations observe
DST. If you are in a location that does not observe DST, please make sure to
uncheck this box.
Wireless Outdoor Sensor
The Wireless Outdoor Sensor sends temperature data to your Wireless Display,
accurate to within a tenth of one degree.
The Outdoor Temperature Sensor uses 2 x “AA”,
Alkaline batteries. To install and replace the
batteries, please follow the steps below:
1. Remove the battery compartment cover on
the back of the sensor.