Lowrance electronic 3200 - Manual (Page 106)

100
3. Once you have selected a highway name you can then select an exit.
Press
↓ to switch to the Exit List, then press ↓ or ↑ until you highlight
the exit, then press ENT.
Find Exit menu, with an exit selected in the Exit List.
4. In the Exit Information screen you have two choices.
A. Press
ENT to
navigate or "go to" the exit.
B. Press →|
ENT to find the exit on the map.
"Go To Exit" option, left, "Find On Map" option, right.
Tip:
You can also look up some additional information on the Exit Serv-
ices located near this exit. Press
↓ to
S ERVICES
|press
↓ or ↑ to select
Service Name|
ENT .