Linksys SRW224P User Manual
Page 35
27
Chapter 5: Configuring the Switch through the Web Utility
System Information
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
Forwarding Database
The Forwarding Database screen displays the following information.
Aging Status. This feature, when enabled, discards dynamic MAC addresses after a set amount of time.
Aging Interval. This is the amount of time after which dynamic address table entries are discarded.
Set the Aging Interval by entering the number of seconds into the text field provided.
Click
Submit to save the changes.
To query a Dynamic IP address click on the Dynamic address icon.
To query a Static IP address click on the Static address icon.
Address Table Settings
Switches store the addresses for all known devices. This information is used to pass traffic directly between the
inbound and outbound ports. All the addresses learned by monitoring traffic are stored in the dynamic address
table. You can also manually configure static addresses that are bound to a specific port.
Figure 5-6: Sys. Info - Forwarding Database