Lincoln Electric PCT 80 - Manual (Page 2)

Pro-Cut 80
www.lincolnelectric.com
FEATURES
• One control dial with current indicators for easy operation and
setup.
• Air pressure regulator, air filter and pressure gauge are standard.
Pressure gauge is right on the control panel for easy setup.
CUT CAPACITY DATA
ELECTRODE LIFE TEST DATA (2)
0
0.50 0.375 0.625
M t l Thi k (I h )
0.75 1.0 1.25
10
20
30
40
0
0 60 120 180
20
40
60
Electrode Pit Depth (X.001 Inch)
Time in Hours Time in Hours 0.5 1.0
CUTTING CAPACITY
Ordering Information Description
KP2063-1B1 Electrode
KP2062-2B1 VORTECH™ Nozzle (.043)(1)
KP2062-3B1 VORTECH™ Nozzle (.053)
KP2062-5B1 VORTECH™ Nozzle (.082) Gouging
KP2064-1 Shield Cup
KP2065-1 Drag Cup
EXPENDABLE PARTS
(1) .043 Nozzle can be used when cutting at 60 amps or lower for a
smaller kerf.
A CLOSER LOOK
PERFORMANCE
QUALITY AND RELIABILITY
• Parts-In-Place safety indicator and lockout circuit to protect both
the operator and the system.
• Thermostatically protected against overheating.
• Line voltage compensation.
• Manufactured under a quality system certified to ISO 9001
requirements.
• Three-year warranty on parts and labor. (1 year warranty on
plasma torch.)
Number of Starts (20 Sec. Arc/Start)
(2) Electrode erosion of .060” is typically end of
electrode life.
Metal Thickness (inches)
Time in Hours
IPM (80% Max. Speed)
Electr
ode Pit Depth (X.001 inch)
[2]
Production Recommended Maximum
Capacity Capacity Capacity
3/4" @ 18 IPM 1" @ 11 IPM 1-1/4" @ 7 IPM