Linksys WVC54GC - Manual (Page 57)

49 Chapter 8: Using the Compact Wireless-G Internet Video Camera’s Web-based Utility
Setup
Compact Wireless-G Internet Video Camera
To save your changes, click the Apply button. To cancel any unsaved changes, click the Cancel button. To get
additional information about the screen’s features, click the Help tab.
Wireless Security
Select the security method you want to use, WEP or WPA Personal (all devices on your wireless network must
use the same security settings). Then follow the appropriate instructions.
WPA Personal
WPA Algorithm. TKIP is automatically selected as the encryption method.
WPA Shared Key. Enter the WPA Shared Key (also called Passphrase or Pre-Shared Key) used by your wireless
network. It must have 8-32 characters.
To save your changes, click the Apply button. To cancel your changes, click the Cancel button.
WEP
TX Key. Select which WEP key (1-4) will be used when your network’s access point or wireless router sends and
receives data.
WEP Encryption. Select the level of WEP encryption you wish to use, 64 Bit Keys (10 Hex chars) or 128 Bit
Keys (26 Hex chars).
Passphrase. Instead of manually entering WEP keys, you can use a Passphrase to generate them. It is case-
sensitive and should not be longer than 16 alphanumeric characters. (This Passphrase is compatible with Linksys
wireless products only. If you are also using non-Linksys wireless products, you will need to enter your WEP keys
manually on those products.) After entering the Passphrase, click the Generate button to create WEP key(s).
Key 1-4. If you used a Passphrase, the WEP keys will be displayed after you have generated them. If you are not
using a Passphrase, manually enter a set of values in each field. (For 128-bit WEP, only one WEP key is
permitted.) If you are using 64-bit WEP encryption, then each key must consist of exactly 10 hexadecimal
characters. If you are using 128-bit WEP encryption, then the key must consist of exactly 26 hexadecimal
characters. Valid hexadecimal characters are “0” through “9” and “A” through “F”.
Authentication. The default is set to Open System, for which the sender and the recipient do NOT use a WEP key
for authentication. You can also choose Shared Key, when the sender and recipient use a WEP key for
authentication. This setting should match the one on your network’s access point or wireless router.
To save your changes, click the Apply button. To cancel your changes, click the Cancel button.
Figure 8-10: Wireless Security - WEP Screen
Figure 8-9: Wireless Security - WPA Personal Screen