Lenoxx Electronics CD109 - Manual (Page 9)

IB-CD109(AD)-WM-E-121302
You can make a program of up to 16 tracks in the order you want them to be played.
PLAY/PROGRAM
LAMP
8
SELECTING YOUR OWN MUSIC PLAYING ORDER
(Programmed Play)
PROGRAM/REPEAT
BUTTON
PLAY/
PROGRAM
REPEAT
1. Slide the FUNCTION switch to CD position.
Make sure the CD is stopped.
2. Press the PROGRAM/REPEAT button. The letters
“P0” will show and the PLAY/PROG. lamp will
flash.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the PROGRAM/REPEAT button to confirm.
The letters “P1” will show and the PLAY/PROGRAM
lamp will flash.
5. Repeat steps 3 and 4. You can program up to 16
tracks (the display will show “Pa”, “Pb” ... “Pf”
for program#11-16).
6. Press to start programmed play. The PLAY/
PROGRAM lamp will be flash.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Slide the FUNCTION switch to OFF position.
Random Play
To play the songs in random order
Press the RANDOM button, and the display will show some moving symbols like
“
...
...
” every 5 second.
Press to skip to next random song.
To resume normal play
Press the RANDOM button again.
PLAY/
PROGRAM
REPEAT
PROG./
REPEAT