Linksys WAP11 v.2.6 - Manual (Page 6)

USB 4-Port Hub USB 2.0
7
ProConnect ® Series
6
Chapter 4: Installing the USB
4-Port Hub
1. Plug the power adapter into the electrical outlet.
2. Plug the power adapter into the power port of the USB 4-Port Hub.
3. For connection to the PC, plug the Type B connector of the included USB
cable into the Hub’s USB Type B port.
Figure 4-1
Power Amber. The Power LED lights up when the Hub is powered on
and connected to the PC.
1-4 Green. Each of these LEDs are port-specific. When a peripheral
is connected to a specific port and there is activity, the associat-
ed LED will light up.
Figure 3-2
The USB 4-Port Hub’s LEDs
Figure 4-2