Lenovo LXH-GJ769F4 User Manual
Page 5
41CD785-608-4B
5
POWER CORD：
1.
The monitor may work at 100---120VAC or 200---240V AC area. (No user adjustment is
required.)
2.
Connect the power cord into your monitor’s power input socket, and then plug the other
end into a 3-pin AC power outlet.
Connecting the Video Cable:
the monitor comes with a built-in video cable. Plug the signal
cable’s 15-pin connector into the computer’s video port and tighten the two screws on the cable
connector. (See figure 2)
Caution: Don’t bend the signal cable, otherwise it will break the inner wire.
Connecting the Power Cord：Plug the power cord into the monitor’s AC power socket. Then
plug the power cord into a grounded AC outlet.
Caution：If the AC outlet is not grounded, install the proper grounding adapter (not supplied).
Figure 2. Connecting signal cable
1.
Power Cord
2.
Signal Cable
Please keep your user manual, monitor packages on a safety place for further
using.
①
②