La Crosse Technology WS-7212U - Manual (Page 22)

22
4) If after 15 minutes the temperature
and humidity are not displayed you
will need to choose another location
for placement of the
temperature/humidity sensor.
5) The best way of doing this is to move
the sensor 10 feet closer to the
indoor weather station.
6) After moving the remote
temperature/humidity sensor please
wait 15 minutes to give the indoor
weather station time to re-acquire the
signal.
Problem: Temperatures do not match if
units are placed next to each other.
Solution: Each temperature/humidity
sensor is manufactured to be accurate to
within 2 degree plus or minus and under
normal conditions. It is possible for 2
temperature/humidity sensors to be as
much as 4 degrees different. The
difference can be exaggerated further
because the temperature/humidity
sensors are designed for different