Tv + video camera connections, Home theater system + tv + video camera – Lenoxx Electronics HT-395 User Manual

Page 18

Advertising
background image

IB-HT395-WM-E-073003

1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your

HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VIDEO CAMERA, this will allow

your CAMERA VIDEO’s sound to play through your HOME THEATER SYSTEM. (NOTE: Many video cameras have

special plugs on one side to connect to your camera.)

2. Insert the video cable (included with your VIDEO CAMERA) into the VIDEO IN jack on the FRONT of your HOME

THEATER SYSTEM, and into the VIDEO OUT jack on your VIDEO CAMERA. (NOTE: Your video camera may have a

3.5mm triple jack, consult your camera’s booklet for details.)

3. Insert the video cable (included) into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the

VIDEO IN jack on your TV.
NOTE: Your VIDEO CAMERA sound will come out of the 2 front speakers plus the subwoofer since the default

setting for the sound output is the same as the audio source from the VIDEO CAMERA (2 channel,

STEREO). For “Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND button. The sound

will come out of all 5 speakers plus the subwoofer.

NOTE: Some video cameras may not allow the Home Theater to play all 5 speakers if the audio output level of the

video camera is too low.

4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the

ON/STANDBY button on the REMOTE to turn the set on (or off).

6. Press the SOURCE button several times till the GAME indicator lights. (This setting is either for a Video Camera or a

TV Game.)

7. Make sure your VIDEO CAMERA is on and follow your VIDEO CAMERA’s instructions.
8. Go to Page 20 for detailed instructions.

TV + VIDEO CAMERA CONNECTIONS

17

Home Theater System + TV + Video Camera

NOTE: Your VIDEO CAMERA

may have a special cable (with a

triple 3.5mm plug on one side)

for connections. This diagram is

only for illustration.

CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8

(OR THE QUICK SETUP DIAGRAM SHEET).

Advertising