Lanzar Car Audio SD34MIP - Manual (Page 11)

01
11
Before You Start
34
06
AM Tuner Section
CD Player Section
522-1620(KHz)
(Europe/Russia)
530-1710 (KHz)
(U.S.A.)
450KHz
35dBuV
VCD Signal System PAL/NTSC
60dB
55dB(1KHz)
0.1%
General
FM Tuner Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
60dB
30dB 1KHz
30-15000Hz
Note:
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
Specifications
Power Requirement 14.4V DC
(11-16V allowable)
Load Impedance
10dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.192 x 178 x50
mm (d/w/h) Dimensions
Approx.1.75kg Weight
Mounting
Dimensions Approx.169 X 182X53
mm (d/w/h)
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
Frequency Range
IF Range
Usable Sensitivity
(-20dB)
Signal-to-noise Ratio
Separation
Distortion
DVD Player Section
Number of channel
5Hz to 20,000Hz
98dB
60dB
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
2 channels
Less than
measurable limit Wow and Flutter
65-74(MHz)
Russia)
Max.Power Output 80W X 4
(Optional )
(Optional )
VCD/CD/MP3/MPEG-4/USB/SD
Number Buttons
During playback, you any track
directly by ( 0~9).
The selected track will be played automati-
cally.
can select
using Number Buttons
* This function is operated by using remote
control only.
Note:
24
MO/ST Selector
During VCD playing, repeatedly press
AUDIO
button to select the mode as bellow:
This function is operated by using the remote
control.
Mono left Mono right Stereo
6
Note:
*
Program Playing
During VCD/CD mode, press PROG, the
TFT displays the program menu. Pressing
NUMBER BUTTONS to select the track
Number and then press to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to and press ENTER to the
previous page; move the cursor to and
press ENTER to the next page.
During this process, press or PROG
to cancel the program playing. 13
The function is only valid on remote control.
Note:
*
22
Playing PBC (Menu)
During VCD status, first pressing TITLE ,
PBC playback starts and the menu of entire
disc appears on the monitor. And then you
can select your favorite track by using
Number Buttons . When a track is playing,
you can button to return to
if you would like to end the track
and select others. To cancel PBC playing,
press
button again.
press MENU
the menu
TITLE
24
3
This function is operated by using the remote
control.
Note:
*
PBC playing confirms to version 2.0 of SVCD/
VCD disc only. *
3
* This function is operated by using remote
control only.
Note:
During CD playback, first press GOTO,
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons. Secondly press GOTO button,
track go to:--:-- appears on TFT, also input
your desired numbers to play the current
time of your selection.
Setting the Playback Time
2
During VCD mode, press GOTO button
to set the playing time, when the TFT dis-
play :
. Press [ ][ ] to select the options,
press ENTER to set the status.Then press
NUMBER BUTTONS or [ ][ ] to set
the current status.
track/disc time/track time/repeat/time
disp
24
2
During MP3/USB/SD mode, press GOTO
first to display : ---/all track, input the
numbers to play the desired track. Press
second :
to adjust the playing time. --:--
2
During MPEG-4 mode, press GOTO first
to display : select:---, input the numbers to
play the desired track. Press
seco-
ndly : to adjust the playing time.
GOTO
time-:--:--
2
19
4