La Crosse Technology WT-2150A - Manual (Page 2)

Snooze button
Function Keys Battery Cover
Starting up the Alarm Clock
The alarm clock uses 1 x AA LR6 battery (Alkaline recommended)
1. Slide the battery cover off as indicated by the triangle to open the battery
compartment.
2. Insert 1 x AA battery, observing polarity.
3. Replace battery cover.
4. Upon power-up, the alarm will sound once and all LCD segments will light
up briefly.
5. The clock will now start searching for the WWVB time signal and the radio
tower icon will flash to indicate signal reception attempt. Do not press any
buttons at this time.
6. Reception typically takes 6-10 minutes during ideal reception time
(nighttime hours) and will timeout after 10 minutes if no signal is found.
7. Upon successful reception, the time and date will be set to absolutely
accurate time (default to Eastern time zone).
8. In the case of no reception keep in mind that for most locations reception
during daylight hours is not possible. In this case, you may manually set the
time or simply wait overnight.
Battery Compartment