What you need to get started – La Crosse Technology Weather Direct Lite WD-3106UR-B User Manual

Page 6

Advertising
background image

Version 1.1 - 11/13/2008

Page 6 of 25

What You Need to Get Started:

• Internet connection – dial-up, cable, DSL or other Internet service will

work.

• Valid e-mail address – required to make sure you can retrieve your

password and receive other information about your user profile.

• When Optional TX-50U Wireless Outdoor Temperature Sensor is

used: 2 “AA” Alkaline batteries for the Wireless Outdoor Sensor


NOTE: Rechargeable batteries are not recommended in the Wireless Outdoor
Sensor due to the wide variation in performance between brands and types.
Please use only fresh Alkaline batteries.

• 3

“AA”

Alkaline or Rechargeable batteries for the Wireless Display

• Visit

www.weatherdirect.com

and click “Register” to Start

• After you have registered and selected a forecast location and Time

Zone for your Wireless Display, the forecast data will show up on the
display within 60 seconds.

• A reasonably current Windows, Macintosh, or Linux PC with internet

browser installed is required for initial set up and configuration changes
and weather updates.

• The browser must be configured with Java Script enabled. Most

browsers allow JavaScript as a standard feature. If you have turned
off support for JavaScript in your browser, please allow JavaScript to
run again to register or configure your Device.

Advertising