Link electronic HDG-821 User Manual

Link

Advertising
background image

800 SERIES

MADE IN THE USA

NOTE: All 30 test patterns are available with all 23 video formats.

FEATURES

LINK ELECTRONICS, INC.

HD TEST SIGNAL GENERATOR
MODELS HDG-820 & HDG-821

‹

23 different HD video formats

‹

30 different test patterns

‹

HD analog and SDI outputs

‹

YUV or RGB analog outputs

‹

Tri-level Sync output

‹

AES audio generation

‹

8 selectable channels to be embedded

‹

2 AES outputs

‹

Power-up user settings

‹

Loadable factory defaults

‹

Adjustable audio frequency and amplitude

‹

Adjustable horizontal & vertical timing (821 only)

The HDG-820/821 series by Link Electronics is a
series of broadcast High Definition Pattern
Generators, providing the user with high quality, low
cost system to produce HD Test Patterns. The
HDG-820/821 is a self contained product for
standard 19 inch rack mounting.

The HDG-820/821 is a high defintion video test
pattern generator in a stand-alone one rack (RU)
chassis. The unit has two serial digital outputs at
1.485GB/s and YUV-RGB analog outputs. The
digital and analog outputs are simultaneous on the
rear panel, and contain the same test pattern. The
user may embed internal audio tones on the digital
video output, if desired.

There are two audio groups supported, which allow
for eight channels. The channels can be enabled on
an individual basis. The internal tones generated are
adjustable from 400Hz to 10KHz, 0 to -30dBFS.
There are also two BNC connectors for AES output,
which will allow four channels of audio for
monitoring. Serial control will allow changes to be
made via a PC, (the serial control is a development
for a later release). There are a total of thirty test
signals available, including SMPTE, EIA and Full
Field Bars.

The Link Electronics product design, performance
and reliability are reflected in the New-Generation of
Link Electronics products. A pair of lighted push
buttons and an optical rotary encoder change and
select various menus. User friendly operation is a
key concept of the HDG-820/821.

The 20X2 Vacuum Fluorescent Dispaly shows data
for operational functions. All user controls are made
from the front panel. All internal adjustments are
made by potentiometers for precise and accurate
settings. The user may choose to have all of the
selections saved for power up defaults.

The HDG-820/821 multi-format generator can be
used where various HD signals are required. Tri-
level-sync has its own separate output and is on all
analog component outputs, RGB or YUV.

The HDG-821 is a gen-lock unit with a pair of looping
BNC connectors on the rear panel. The gen-lock
version provides adjustment of H & V Timing. The
HDG-820 is a non gen-lock unit.

1. 100% COLOR BARS
2. 75% COLOR BARS
3. SMPTE BARS
4. 75% COLOR BARS/5 STEP
5. LUMA 5 STEP
6. LUMA 10 STEP
7. LUMA RAMP
8. CHROMA 5 STEP

9. CHROMA 10 STEP
10. CHROMA RAMP
11. SDI PATHOLOGICAL
12. SDI EQ
13. SDI PLL
14. LUMA MULTIBURST
15. LUMA SWEEP 1-30MHz
16. LUMA PULSE & BAR

17. CHROMA MULTIBURST
18. CHROMA SWEEP 5-15MHz
19. CHROMA PULSE & BAR
20. 100% WHITE
21. 75% YELLOW
22. 75% CYAN
23. 75% GREEN
24. 75% MAGENTA

25. 75% RED
26. 75% BLUE
27. 50% GRAY
28. BLACK
29. LUMA ZONE PLATES
30. CHROMA ZONE PLATES

LINK

ELECTRONICS, INC.

‹

2137 Rust Avenue

‹

Cape Girardeau, MO 63703-7668

Phone 573 334 4433

‹

FAX 573 334 9255

Advertising