How to use the washer, Option child lock door locked, Status indicator – LG 3828ER3054V User Manual

Page 17: Est. time remaining

Advertising
background image

HOW TO USE THE WASHER

OPTION

CHILD LOCK

DOOR LOCKED

1 6

• Use this option for loads that need pretreatment. Adds

16 minutes prewash and a spin cycle.

1. Prewash

• Displays whenever the door of the washer is locked.

• The door can be unlocked by pressing the

Start/Pause

button to stop the washer.

NOTE: If the water temperature or the level is too high, the

door cannot be unlocked.
Do not try to force the door open when

is displayed.

STATUS INDICATOR

• It shows elapsed time of the cycle the washer is

operating.

EST. TIME REMAINING

• This display shows the estimated time remaining

in the cycle when operating.

• This washer automatically detects the wash load

(weight) and optimizes the washing time. After
detecting, the display will show the adjusted time
remaining.

• Use this option to prevent unwanted use of the washer.

Press and hold PRE WASH button for 3 seconds to
lock/unlock control.

• When Child lock is set, “ ” blinks and all buttons are

disabled except the Power

button. You can lock the

washer while it is operating.

• Adds extra water to the wash and rinse cycles for

superior results.

5. Water Plus

• This option provides an additional rinse.

• Use this option to ensure the removal of detergent or

bleach residue from garments.

3. Extra Rinse

• Use this option to rinse and then spin.

2. Rinse+Spin

• Adds more time to the wash and rinse cycles for better

stain removal.

• Automatically provides a rinse.

4. Stain cycle

• Spin Sense

TM

‚ can be used when there is a vibration

problem, especially on wood floor installations.

• To operate Spin Sense

TM

‚, press and hold the Stain

Cycle button for 3 seconds when the washing machine
is running on any cycle.

• When Spin Sense

TM

‚ has been selected, the Spin

Speed button light will blink on and off continually to
indicate that the Spin Sense

TM

‚ function has been

selected.

• Push and hold the Stain Cycle button again for 3

seconds to cancel Spin Sense

TM

.

• Once Spin Sense

TM

‚ has been selected, if will continue

to function even if interrupted by a power failure.

6. Spin Sense

TM

Advertising