Linksys DMSPK50 User Manual
Page 2
Cisco Consumer Business Group
121 Theory
Irvine, CA 92617 USA
www.linksysbycisco.com
Linksys, Cisco and the Cisco Logo are registered
trademarks or trademarks of Cisco Systems, Inc.
and/or its affiliates in the U.S. and certain other
countries. Other brands and product names are
trademarks or registered trademarks of their
respective holders. Copyright © 2008 Cisco
Systems, Inc. All rights reserved.
The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless
network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from
the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and
other adverse conditions.
Specifications are subject to change without notice.
8112010NC-RR
Model:
DMSPK50
Specifications
Model
DMSPK50
Main Functions
Two Way Bass-Reflex Loudspeaker
Frequency Range
-6dB at 65Hz and 23kHz
Frequency Response
80Hz-20kHz +/-3dB
Crossover Frequency
3kHz. 2’nd Order LPF. 2’nd Order HPF
Sensitivity
85dB SPL (2.83V in 1meter/3’)
Nominal Impedance
6 Ohm
Minimum Impedance
4.6 Ohm
Max Power Handling
50 Watt
Recommended
Amplifier Output Power
20W to 50W
Terminals
Gold Plated for up to 10 AWG / 4mm2 Speaker Cable
Front grille
Perforated Aluminum Front
Finish
Black Enclosure. Natural Anodized Front Grill
Placement
On Stand or Shelf (Minimum 5 cm / 2" from Back Wall)
Environmental
Dimensions
5.1" x 5.9" x 6.2"
130 x 149 x 157 mm
Weight
3.3 lb (1.5 kg)
Certification
CE
Operating Temp.
32 to 104° F (0 to 40° C)
Storage Temp.
-4 to 158° F (-20 to 70° C)
Operating Humidity
10 to 85% Noncondensing
Storage Humidity
5 to 90% Noncondensing
Package Contents
Two Loudspeakers (One Pair) DMSPK50
•
Two 9’ (3 m) Speaker Cables (AWG16)
•
Quick Install (Printed)
•
Supplemental Information (Printed)
•
Minimum Requirements
A Stereo System with an Amplifier of 20-50W Output Power pr. Channel into 4 Ohm load
•
A Stand or Shelf with Distance to Rear Wall of Minimum 2" (5 cm)
•
Extended Speaker Cables if Distance Requires Cables Longer Than 9’ (3m)
•
Features
Two-Way High Performance
•
Audio Loudspeakers with 3/4"
Neodymium Silk Tweeter and
4" Long-Throw and High-Gauss
Woofer
Vented Tuned Port Type with
•
Bass Extension Down to 65Hz
Goldplated Terminals, Accepting
•
High Performance Speaker
Cables up to 10 AWG / 4mm2
Acoustically Optimized
•
Aluminum Front Grille. Always
Stable Three Feet Foundation
Tuned and Optimized for
•
Excellent Music Reproduction
with High Performance
Amplifiers and Hi-Fi Equipment
Special Matching Design and
•
Size with Linksys by Cisco
Director (DMC250)