English – Jabra SP700 User Manual
Page 13
12
english
Jabra SP700
Using FM transmitter when voice announcement function
is off
if voice announcement function is turned off you can select any of
the pre-programmed frequency channels in the following order:
Channel
no
Pre-
programmed
frequency
leD indication
(fm frequency selection mode)
battery
status
Call
status
bluetooth
status
fm
status
1
88 .1 mhz
off
off
on
flash
2
88 .3 mhz
off
on
off
3
88 .5 mhz
on
off
off
4
88 .7 mhz
off
on
on
5
88 .9 mhz
on
off
on
6
89 .1 mhz
on
on
off
7
89 .3 mhz
on
on
on
To select the desired fm frequency channel, follow these steps:
- Connect your mobile phone and speakerphone .
- Press fm button to enter fm mode . The default frequency
channel is 88 .1mhz
- Press the volume up or volume Down button to move to the
next/previous channel .
- manually turn your radio into the same fm frequency and you
are now ready to transmit calls or music from your phone to
your car stereo .
note1: While changing frequencies, fm Status indicator flashes
every 1 second .
note2: While changing frequencies, a repeated beep-tone will be
heard and frequencies can be recognized by the combinations of
Status indicators . (See the table above .)
Caller ID
When you have an incoming call the speakerphone will announce
the number of the caller . if your radio supports rDS Text the
phone number will furthermore be showed on the radio display .