Lenovo IDEAPAD Y560P - Manual (Page 27)

Chapter 2. Learning the basics
13
To put the computer into sleep state, do one of the following.
• Click and select Sleep from the Start menu.
• Press Fn + F1.
To wake the computer, do one of the following.
• Press the power button.
• Press any key on the keyboard.
• If you do not use the computer for a long time, the computer will switch
from sleep to hibernation automatically. To wake it up, just press the
power button.
„ Shutting down your computer
If you are not going to use your computer for a day or two, shut it down.
To shut down your computer, click
and select Shut Down from the Start
menu.
Note: Wait until the power indicator light starts blinking (indicating that the
computer is in sleep state) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing
loss of data.