Lenovo D1960 - Manual (Page 16)

4
Image Adjustment
Luminance Adjust Range Description
Brightness 0-100 Backlight Adjustment
Contrast 0-100 Constrast from Digital-register
Eco
Standard Standard Mode
Text Text Mode
Internet Internet Mode
Game Game Mode
Movie Movie Mode
Esports Sports Mode
Gamma
Gamma1 Adjust Gamma1
Gamma2 Adjust Gamma2
Gamma3 Adjust Gamma3
Image Setup
Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise
Focus 0-100 Adjust Picture Phase to reduce Horizontal-Line noise
H-Position 0-100 Adjust the horizontal position of the picture
V-Position 0-100 Adjust the vertical position of the picture
Color Temperature
Warm 6500K Recall Warm Color Temperature from EEPROM
Normal 7300K Recall Normal ColorTemperature from EEPROM
Cool 9300K Recall Cool Color Temperature from EEPROM
sRGB Recall SRGB Color Temperature from EEPROM
User
User-B Blue Gain from Digital-register
User-G Green Gain Digital-register
User-R Red Gain from Digital-register
User-Y Yellow Gain from Digital-register
User-C Cyan Gain from Digital-register
User-M Magenta Gain from Digital-register
Color Boost
Full Enhance On or Off Disable or Enable Full Enhance Mode
Nature Skin On or Off Disable or Enable Nature Skin Mode
Green Field On or Off Disable or Enable Green Green Field Mode
Sky-blue On or Off Disable or Enable Sky-blue Mode
AutoDetect On or Off Disable or Enable AutoDetect Mode
Demo On or Off Disable or Enable Demo Mode
Picture Boost
Frame Size 14-100 Adjust Frame size
Brightness 0-100 Adjust Frame Brightness Contrast
Contrast 0-100 Adjust Frame Contrast
Hue 0-100 Adjust Frame Hue Saturacion
Saturation 0-100 Adjust Frame Saturation Position
Position
H. Position Adjust Frame horizontal Position
V. Position Adjust Frame vertical Position
Bright Frame On or Off Disable or Enable Bright Frame
OSD Setup
V. Position 0-100 Adjust the Vertical position of OSD
H. Position 0-100 Adjust the Horizontal position of OSD
Timeout 0-100 Adjust the OSD Timeout
Language Select the OSD language
Extra
Input Select
Analog Select Analog Signal Source as Input
Digital Select Digital Signal Source as Input
Auto Configure Yes or No Auto adjust the picture to default
Reset
Yes or No
Reset the menu to default
DDC/CI
Yes or No
Turn ON/OFF DDC/CI support
Information
Show the information of the main image and sub-
image source