Lenoxx Electronics CD-2086 - Manual (Page 20)

IB-CD2086(AD)-WM-E-031705
The sound is weak or has
poor quality.
CD/MP3 does not play while the
radio may continue to play.
•
It is normal since the radio uses less power
than the CD/MP3 player.
19
•
I nsert the AC plug into a wall outlet securely.
• Make sure the batteries are installed correctly
and they are fresh.
• Make sure that the CD compartment is closed.
• Clean the disc.
• Take out the disc and leave the CD DOOR
open for about an hour to dry moisture
condensation.
• Make sure the FUNCTION switch is at the
CD/MP3 position.
• Replace disc (this set will not play damaged
or scratched discs), or buy a disc repair
polisher to repair it yourself.
• Clean the discs, or replace them if the discs
are badly damaged.
• Place the player in a location with less
vibration.
• Check if the batteries are fresh.
• Your MP3 disc may not be supported on this
player. This player will play most standard
MP3 discs.
G
en
er
al
• Replace all the batteries with new ones if
they are weak.
• Bring the set near a window, or rotate the
set for better AM reception; or draw out
the FM antenna for better FM reception.
R
ad
io
“ NO DISC ” or “ BAD DISC ”
appears in the display even
when a disc is in place.
TROUBLE SHOOTING
Problem Remedy
The power is not on.
There is no sound.
• Make sure the FUNCTION switch is at the
right position as you want.
• Adjust the volume.
• Unplug the headphones when listening
through speakers.
• Insert a CD or an MP3 disc with the label
side up.
Discs do not play.
C
D
/M
P
3
p
la
ye
r
The sound drops out.
MP3 playback does not work
or stops.
• Re-burn a new MP3 disc. Make sure the disc
was recorded in MP3 or WMA format.
• Sometimes downloaded songs can only play
on the computer which downloaded the songs.
•
Some MP3 songs can not be copied onto discs.
This is the new DRM digital rights management
to prevent unlimited copies.
IB-CD2086-WM-E-012005(WMA).pmd 3/22/2005, 5:52 PM 20