Linksys ETHERFAST LNE100M - Manual (Page 5)

• One EtherFast ® 10/100 Managed Network Adapter
• One Setup Utility CD
• One User Guide (included on the Setup Utility CD)
• One Registration Card (not shown)
• Quick Install for Windows Operating Systems (not shown)
• 200MHz or Faster CPU
• Available PCI 2.2 Slot
• CD-ROM Drive
• Windows 98/Me/NT 4.0/2000/XP
Instant EtherFast ® Series
Chapter 1: Introduction
This powerful auto-negotiating 10/100 Mbps Ethernet interface card features
network management functions to save you time and hassle. Configure, check
error rates, and keep an inventory of your network resources from one central-
ized location.
The Wake-On-LAN function remotely "wakes up" any PC on the network, so
you can handle maintenance chores during off-hours. The 802.1Q support lets
you optimize your network traffic by dividing the network into smaller Virtual
LANs, while packet delivery is prioritized using 802.1P signaling.
• Easy to Use Plug-and-Play 10/100 PCI Network Adapter
• Adapter settings can be managed via SNMP using standard MIB browser
• Full Duplex Capability at Up To 200Mbps
• Connects to Both 10Mbps Ethernet and 100Mpbs Fast Ethernet Networks
• Power On your PC from anywhere on the network with Wake-On-LAN
Management
• Complete 802.1Q VLAN support for use in segmented networks
• Support for IP Checksum offloading built-into the adapter driver
• 802.1p tagging support for Quality of Service (QoS)
• Configuration utility allows for complete management of the network
adapter settings
Package Contents
Features
The EtherFast ® 10/100 Managed Network Adapter
2 1
Minimum Requirements
EtherFast ® 10/100 Managed Network Adapter
Figure 1-1