Lenoxx Electronics CD-965 - Manual (Page 14)

IB-CD965(CDM32J-60F8)-WM-E-010504
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 64 tracks can be programmed).
MP3 PROGRAM PLAY
During programming, the word PROG shows in the display. To program songs to play in
your preferred order, follow steps below:
1.Press the PROGRAM button in STOP
mode.
The word PROG will show in the display
and the title or album number will flash.
2.Press the SKIP/SEARCH button ( or
) to select title number 2 (example).
Title number
5.Press the PROGRAM button. Track 3 is
now programmed.
Program number 2 will now show in the
display, ready for your next selection
of track.
6.Repeat steps 2 to 5 to program other
tracks till you finish (up to 64 selections).
7.After programming is finished, press
PLAY to begin programmed play. Music
begins with PROG shown in the display.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press the
STOP button twice. You may press
the PLAY button to re-start normal play.
Your programmed memory will be
lost:
• When the door is opened.
•
When the batteries are exhausted or
removed.
• When the power is off.
Program
number
4.Press the SKIP/SEARCH button (
or ) to select track number 3 (example).
3.Press the PROGRAM button. Title 2 is now
selected, and the display shows:
Track
number
Program
number
13
Programming Example:
Program Number 1 2 3 4 5 6 7 8
Track Number (song number)
1
5 8 1 2 4 5 6
etc.
etc.
etc. 2 Album Number (title number)
3
4 3 2 5 3 1
IB-CD965(CDM32J-60F8)-WM-E-010504.p65 1/13/2004, 12:21 PM 14