Lenoxx Electronics CD-90 - Manual (Page 5)

2.Using AC Wall Outlet Power
Your player may be powered from any household 120V AC outlet, using the AC
adaptor included. Insert the adaptor’s small connector plug into the DC 4.5V Jack
marked on player (on the rear of the set), and plug the adaptor into
an AC outlet.
NOTE: If the AC Adaptor is connected, and regular batteries are installed, the
player automatically switches to the AC Adaptor power and the batteries
are not used.
CAUTION:
To prevent electric shock, do not use this AC Adaptor with an extension cord or outlet,
unless it can be fully inserted without exposing any part of the blades. Do not use any
other adaptor to power this set or you may damage your set.
CONNECTING TO HOME STEREO SYSTEMS
The LINE OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the
cable’s mini plug to the LINE OUT jack on your player, and the other appropriate end
usually RCA JACKS to the CD/AUX INPUTS of your home stereo.
YOUR
CD PLAYER
TO AUX IN JACKS TO LINE OUT JACK
YOUR STEREO
SYSTEM
OPTIONAL CABLE
3.5mm TO RCA JACKS
4