Lenovo L152 - Manual (Page 5)

2
Chapter 2
Connecting the monitor to the computer and the power supply
2.2 Connect your monitor to computer
2.2.1 Turn off your computer and unplug its power cable.
2.2.2 Connect the signal cable to the video port on the back of your computer.
2.2.3 Connect the power cable for your monitor. ( to AC power jack)
2.2.5 Plug the computer and monitor power cables into a nearby outlet.
2.2.6 Turn your computer and monitor on, if your monitor display an image, you
have successfully installed the monitor. If the monitor does not display an
Image, check all the connections.
2.2.4 Connect one end of the audio cable on the back of the connector to the sound
card of the computer output, (Only for monitor with speaker function)
2.1 Install and uninstall the pedestal
To attach the base to your monitor, please following the steps for installation of the
pedestal as below:
step 1 step 2
(1) VGA Signal Cable
Note: (3) only for monitor with speaker function
Audio in (3)
Installation
step 3
AC Power cable (2)