Laser iRange SPK-IPT01 - Manual (Page 4)

SPK-IPT01 User Manual
6 7
10. To use an external music source (i.e. Laptop). Connect it to the AIP input jack and press
the “AUX” button on the remote. If you don’t connect iPod on AIP, the AIP will choose the
external source automatically.
Note:
This AIP unit is compatible with iPod touch, iPod classic, iPod nano,
iPod 5th gen, iPod 4th gen, iPod mini.
SPECIFICATIONS:
Product model SPK-IPT01
Amplifi er output power left/right 4W x 2, subwoofer 15W x 1
Amplifi er input sensitivity ≤ 400mV
Amplifi er SNR ≥ 82dB
Amplifi er Distortion ≤ 0.7%
Frequency response 60Hz~20KHz
Speaker units tweeter ø 35mm, subwoofer ø 94mm
Power voltage AC110-240V, 50760Hz
7. Press the “DEFAULT” button for background music. Press the “ ” to mute. Press “DEFAULT”
or “ T’ again or the volume button to resume normal play.
8. The “STANDBY” button will switch the AIP unit on and will also put the unit into standby
mode. This will be indicated by a fl ashing light.
9. After using the AIP unit, please fl ick the switch to the “OFF” position at the back of the unit,
then remove external devices.