LG 30FZ1DC - Manual (Page 11)

P A G E 1 1
VCR Connections
1 Locate the Cable jack on the back
of your TV. Connect this to out
jack on the back of your VCR.
Or find the composite video and
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
You may connect either the com-
posite video or the S-Video cables
to your TV. (Do not connect BOTH
the composite and the S- Video
cables. In the event that you con-
nect both composite and the S-
Video cables, only the S-Video will
work.)
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your TV.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna jack on the back of your TV.
In
Out
Audio
L R
Video
3 4
S-Video
Output
Switch
DVD/DTV INPUT
VIDEO
AUDIO
L(MONO) R
ANTENNA
P R
COMPONENT1
(480i/480p/720p/1080i)
COMPONENT2
P B
Y
L
R
IN1
IN2
AUDIO
P R
P B
Y
L
R
AUDIO
+ 75 Ω
S-VIDEO
INPUT
IN3
RF coaxial wire
(75 ohm)
A/V cables
not included
with TV
or
VCR
Back AV panel
Cable TV Wall
jack panel
Antenna
Round wire
(75 ohm)