Maintenance, Cleaning the cabinet, Cleaning the lens – Lenoxx Electronics CD-57 User Manual

Page 8: Cleaning the discs, Handling compact discs

Advertising
background image

IB-CD57-FD-E-063004

Cleaning the cabinet

Wipe with a soft cloth. If the cabinet
is very dirty, dampen (not dripping
wet) the cloth with a weak solution
of soapy water, and then wipe
clean.

Cleaning the lens

A dirty lens will c ause sound
skipping. If the lens is very dirty,
the player may not work. We
suggest using a special cleaning
disk (not included) available in most
music and Hi-Fi stores. However,
if you do not have one, you may
use the instructions below.

Use a cotton swab very slightly
dampened with alcohol to clean the
lens.

MAINTENANCE

NOTE:

Always press the STOP button and
wait for the disc to stop rotating
before sliding the CD DOOR OPEN
button to remove the disc.

7

Cleaning the Discs

Fingerprints should be carefully
wiped from the surface of disc
with a soft cloth. Unlike
conventional records, compact
discs have no grooves to collect
dust and micros copic dirt, so
gently wiping them with a soft
cloth should r emov e most
par ticles. Wipe in a straight
motion from the center to the
edge.

Never use thinner, benzine,
record cleaner or antistatic spray
on a compact disc. Such chemicals
can damage its plastic surface.

Handling Compact

Discs

Dirty, scratched or warped discs
may cause skipping or noise.

Handle the disc only by the edges.
To keep clean, do not touch its
surface.

Discs should be stored in their
cases after use to avoid scratches.

Do not expose discs to direct
sunlight, high humidity, high
temper atur es, or dust, etc.
Prolonged exposure to extreme
temperatures can warp the disc
(such as leaving the discs in your
car during summertime).

Do not stick or write anything on
either side of disc. Sharp writing
instruments, or the inks used in
some felt-tipped pens, may
damage its surface.

To remove the Disc

Open the CD DOOR by sliding the
CD DOOR OPEN button, hold the
dis c by the edge w hile slightly
pressing on the center spindle as
illustrated, then lift it from the edge
to release and remove.

IB-CD57-FD-E-063004.P65

7/1/2004, 4:06 PM

8

Advertising