Lincoln Electric VANTAGE 400 (AU) - Manual (Page 26)

C-1 ACCESSORIES C-1
FIELD INSTALLED OPTIONS /
ACCESSORIES
K903-1 SPARK ARRESTOR - Includes a heavy gage steel,
approved spark arrestor, clamp and adapter for mounting to
the muffler exhaust pipe.
K704 ACCESSORY SET - Includes 35 ft. (10m) of elec-
trode cable and 30 ft. (9.1m) of work cable, headshield,
work clamp electrode holder. Cables are rated at 400
amps, 100% duty cycle.
K857 25 ft (7.6m) or K857-1 100 ft. (30.4m) REMOTE
CONTROL
Portable control provides same dial range as the output con-
trol on the welder. Has a convenient 6 pin plug for easy con-
nection to the welder.
K1858-1 Service Indicator Kit- Provides a GO / NO-GO
visual indication of air cleaner element useful service life.
Filter service based on restriction readings allows the
longest life possible from the filter and best engine protec-
tion.
K2641-2 Trailer - A 4-wheel steerable trailer for in-
plant and yard towing. Comes standard with a Duo-
Hitch™, a 2” Ball and Lunette Eye combination hitch.
K2642-1 Polarity/Multi-Process Switch- For easy polarity
switching. Example: DC- stick root pass on pipe and DC+
stick for hot, fill and cap passes. Also for an easy process
change. Example DC+ stick root pass on pipe and DC_
innershield self shielded flux core wire for hot, fill and gap
passes. 6 and 14 pin remote connections can be made to
this unit. For all lincoln Chopper technology engine-drive
welders Mounts on roof with Docking Kit.
K2663-1 Docking Kit-Secures Polarity/Multi-Process
Switch, mounts on the roof of all Lincoln Chopper technolo-
gy engine-drives.
WIRE FEEDER OPTIONS
K2613-1 LN-25 PRO PORTABLE WIRE FEEDER-The
MAXTRAC® wire drive enhances performance, while the
replacement case, and many other upgrade options that can
be installed in less then five minutes aid in the serviceability.
KP1697-5/64 Drive Roll Kit- Includes: 2 polished U
groove drive rolls, outer wire guide and inner wire
guide for solid core wire. (Used on LN-25 Pro)
KP1697-068 Drive Roll Kit- Includes: 2 polished U
groove drive rolls, outer wire guide and inner wire
guide for solid core wire. (Used on LN-25 Pro)
KP1696-1 Drive Roll Kit- Includes: 2 V groove drive
rolls and inner wire guide for Steel Wires. (Used on
LN-25 Pro)
VANTAGE® 400 (AU)
K449 LN-25 - Includes internal contactor for across the arc
operation (no control cable). Provides “cold” electrode until
gun trigger is pressed. Includes gas solenoid. For spools up
to 44 LBS (20Kg).
K1870-1 LN-15 Across the Arc Wire Feeder.
Portable, lightweight, compact CC/CV unit for flux-cored and
MIG welding. Includes Gas Solenoid, adjustable flow meter
and internal contactor. For 10-15 lb. (4.5-6.8kg) spools.
Magnum Gun and Magnum Gun Connector Kit are required
for gas-shielded welding. Innershield Gun is required for
gasless welding.
K126-2 Magnum 350 Innershield Gun
K1802-1 Magnum 300 MIG Gun (for LN-25)
K470-2 Magnum 300 MIG Gun (for LN-15, Includes
Connector Kit)
K466-10 Connector Kit (for LN-15, K470-2)
K1500-1 Gun Receiver Bushing (for LN-15 & K126-2)
Note: See Wire Feeder IM manuals for appropriate Drive
Roll and Guide Tubes.
TIG OPTIONS
K1783-9 Pro -Torch® PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with valve for
gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch
Magnum Parts Kit provides all the torch accessories you
need to start welding. Parts kit provides collets, collet bod-
ies, a black cap, alumina nozzles and tungstens in a variety
of sizes, all packaged in an easy to carry reclosable sack.
K870 Foot Amptrol®
K963-3 Hand Amptrol®
K2535-1 Precision TIG 225 Ready-Pak(For AC TIG)
K2350-2 Invertec® V205-T AC/DC One-Pak™ Package
(For AC TIG)
PLASMA CUTTING
K1601-1 Pro-Cut 55-Cuts metal using the 3-phase AC gen-
erator power from the engine driven welder. Accepts 3-
phase power.