Linear RV5080 - Manual (Page 8)

8
Sound Controls
(Continued)
Mute:
Press the MUTE button to mute the volume
level. Press the MUTE button again to restore the
volume.
Speaker Selection
Selecting Speaker Sets:
• Press the A button to toggle speaker set A on
and off. The LED above SPEAKER A lights up
when speaker set A is on.
• Press the B button to toggle speaker set A on
and off. The LED above SPEAKER B lights up
when speaker set B is on.
• Press the C button to toggle speaker set A on
and off. The LED above SPEAKER C lights up
when speaker set C is on.
Setting the Clock
1. Press the DISP button until the clock appears in
the display.
2. Press and hold the DISP button until the Hours
number starts flashing.
3. Rotate the VOLUME knob until the correct Hour
appears in the display.
Note: When setting the clock make sure to
select the correct AM or PM.
Hold