LG LFD21860 - Manual (Page 20)

OPTIBIN CRISPERS
The Optibin Crispers provide fresher-tasting fruit and
vegetables by letting you easily control humidity inside the
crisper. The Optibin Crispers include: 1) a humidity control
knob at the front of the crisper cover and 2) a large lattice on
the inner surface of the cover to hold or release moisture.
CRISPER HUMIDITY CONTROL
You can control the amount of humidity in the moisture-
sealed crispers. Store vegetables or fruits requiring more
or less humidity in separate crispers. Adjust the control to
any setting between and .
• lets moist air out of the crisper for best storage of
fruits.
• keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
w CAUTION: The glass shelf over the crisper is not firmly
secured. Be careful when tilting.
REMOVING CRISPER
u Crispers without rails
1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.
u Crispers with rails
To remove the crisper
1. Pull the drawer out to full extension.
2. Lift the front of the crisper up and pull it straight out.
To replace the crisper
1. Push rails to the back of the compartment.
2. Insert the back corner of the crisper into the frame.
3. Slightly tilt up the front and push the drawer back until it
snaps into place.
USING YOUR REFRIGERATOR
20
1
2