Lasko 2418QM User Manual

Quick mount system, Model 2418qm, General safety instructions

Advertising
background image

Innovators in Home Comfort

TM

MODEL 2418QM

New 12/01

5084406

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

1. Never insert fingers, pencils, or other foreign objects through

the grill.

2. Disconnect fan when moving it from one location to another.

3. Be sure that the fan is on a stable surface when operating to

avoid the chance of it overturning.

4. Disconnect fan when removing housing parts for cleaning.

Reinstall parts before reconnecting to power supply.

5. DO NOT use this fan in a window. Rain may cause an

electrical hazard.

6. WARNING: To reduce the risk of fire, electric shock or

personal injury:

a)

Do not use this fan with any solid-state speed control device.

b)

Unplug fan before cleaning or servicing.

c)

If you disassemble your fan, completely reassemble
before plugging into outlet.

7. The power cord is equipped with a three-prong grounded plug

that must be inserted into a matching receptacle. Under no
circumstances must the grounding prong be cut off the plug.

WARNING: USE OF A THREE-PRONG TO TWO-PRONG
ADAPTER IS NOT RECOMMENDED. IMPROPER CONNECTION
MAY CREATE THE RISK OF ELECTROCUTION.

OPERATION

1. Plug the fan into any standard 120V AC household outlet.

2. Using the rotary switch, set the desired fan speed.

3. Tilt fan to direct air flow.

MAINTENANCE

ALWAYS UNPLUG CORD BEFORE CLEANING.

CLEANING: IMPORTANT! DO NOT immerse electrical parts in
water! Parts may be cleaned with a mild detergent and water.
Wipe all other parts with a soft cloth moistened with water and
mild detergent only. DRY ALL PARTS COMPLETELY BEFORE
RECONNECTING TO POWER SOURCE.

LUBRICATION: Motor is permanently lubricated.

Store in a clean dry area when not in use.

1

New 12/01

5084406

COLGANDO EL VENTILADOR EN EL SOPORTE
PARA LA PARED

1. Sostenga el ventilador en una posición vertical, como si estuviera

sobre en el suelo.

2. Coloque el borde trasero del pedestal en los ganchos del soporte

para la pared.

(Figura 2)

3. Permita que el pedestal gire hacia abajo de modo que los pies de

goma delanteros se apoyen en la pared debajo del soporte de
montaje.

(Figura 3)

4. Incline la cabeza del ventilador a la posición deseada.

4

Figura 2

BordeTrasero

del Pedestal

Gancho

Figura 3

Sistema de montaje rápido

LA CAJA DE CONTROL DEBE

MONTARSE EN EL PEDESTAL

ANTES DE USAR EL VENTILADOR

1. Colocar su ventilador en una superficie nivelada y seca.
2. Remover el material de empaque de la caja de control

del ventilador.

3. Remover el tornillo de sujeción de la parte trasera de la caja

de control del ventilador.

4. Asegurarse de que el alambre de la caja de control del

ventilador al motor está entre la parta del pedestal y la rejilla tal
como se muestra.

5. Insertar el tornillo de sujeción de la parte trasera del ventilador a

travez del orificio en la pata del pedestal tal como se muestra.

6. Alinear la caja de control del ventilador con el

tornillo de sujeción.

7. Apretar el tornillo de sujeción con la mano. No lo

aprete demasiado.

NO DESECHE LA BOLSA CON TORNILLOS, ESTOS SON PARA
MONTAR EL MONTAJE DE SOPORTE A LA PARED.(VEA EL
MONTAJE DE LA PARED)

18" HIGH VELOCITY
PIVOTING FLOOR FAN
WITH QUICK MOUNT SYSTEM

WALL BRACKET MOUNTING

1. Choose a mounting location which will allow installation

of the supplied 3/8” (9.5mm) lag bolt directly into wall
studs. The bracket has mounting holes on 16” (406mm)
centers. (Figure 1)

2. Using the Wall bracket as a template, mark the hole

locations on the wall after leveling bracket.

3. Drill four pilot holes for the mounting bolts using a drill

bit no larger than 1/4” (6.5mm).

4. Install four lag bolts and securely tighten.

QUICK MOUNT SYSTEM

Your fan may be wall mounted using the new
quick mount wall bracket and hardware supplied
with your fan.

SI NECESITA PIEZAS ADICIONALES FAVOR DE COMUNICARSE CON EL FABRICANTE POR LA GARANTIA DEL REMPLAZO DE PIEZAS. INCLUYA UNA COPIA DE
LA PRUEBA DE COMPRA, EL TIPO Y ESTILO DEL VENTILADOR, ESTA INFORMACION PUEDE LOCALIZARLA EN LA PARTE DE ABAJO DE LA UNIDAD.

ESTE PRODUCTO ESTA GARANTIZADO CONTRA DEFECTOS DE FABRICACIONY/O MATERIALS POR UN AÑO A PARTIR DE LA FECHA DE COMPRA. A NUESTRA
OPCION, PIEZAS QUE SE COMPRUEBEN QUE ESTEN DEFECTUOSAS SERAN REPARADAS. REMPLAZADAS O SE REMPLAZARA EL PRODUCTO POR COMPLETO.

SI NECESITA REPARACIONES ELECTRICAS O MECANICAS DURANTE EL PERIODO DE GARANTIA, ENVIE LA UNIDAD POR CORREO O FLETE PAGADO AL CENTRO
DE SERVICIO MAS CERCANO, LISTADO EN ESTA TARJETA.

SI SOLAMENTE NECESITA REMPLAZAR UNA PIEZA, TIENE QUE INDICAR EL TIPO Y ESTILO DEL VENTILADOR, ESTA INFORMACION SE ENCUENTRA EN LA PARTE
DE ABAJO DE LA UNIDAD. DE CUALQUIER FORMA, SE SOLICITA UNA COPIA DE LA PRUEBA DE COMPRA.

ESTA GARANTIA NO ES VALIDA SI EL DANO OCURRE DEBIDO A UN ACCIDENTE, MANEJO, INSTALACION, OPERSCION INCORRECTA, DANO DURANTE EL
TRANSPORTE, MALTRATO, USO INDEBIDO, REPARACIONES HECHAS O INTENTADAS NO AUTHORIZADAS, O EL USO DEL PRODUCTO PARA FINES COMERCIALES.

TODAS LAS GARANTIAS EXPRESAS O IMPLICITAS, TIENEN UNA DURACION DE UN ANO A PARTIR DE LA FECHA DE COMPRA ORIGINAL. ESTA GARANTIA
EXPRESAS O IMPLICITAS, TIENEN UNA DURACION DE UN ANO A PARTIR DE LA FECHA DE COMPRA ORIGINAL. ESTA GARANTIA NO CUBRE
RESPONSABILIDADES POR DANOS PORTUITOS O CONSECUENTES POR NINGUNA CAUSA.

DADO QUE ALGUNOS ESTADOS NO PERMITEN NINGUNA LIMITACION EN LA DURACION DE UNA GARANTIA IMPLICADA, O LA EXCLUSION O RESTRICCION DE
DANOS FORTUITOS O CONSECUENTES. LA LIMITACION O EXCLUSION ANTES MENCIONADA PODRIA SER NO VALIDA. ESTA GARANTIA EXTIENDE AL
COMPRADOR ORIGINAL DERECHOS LEGALES ESPECIFICOS Y USTED PODRIA TENER OTROS DERECHOS, LOS CUALES VARIAN DE UN ESTADO A OTRO.

GARANTIA LIMITADA

PARA PIEZAS:

Para Repuestos Llame al: 1-800-966-2028. DE LUNES A VIERNES, DESDE LAS 8 DE LA MAÑANA A LAS 4 DE LA TARDE, HORA DEL ESTE.
"POR FAVOR NO DEVUELVA EL PRODUCTO AL SITIO DONDE LO COMPRÓ".
Cuando llame, refiérasa al tipo y estilo del producto (situados en
la base del producto).

PARA OBTENER ASISTENCIA TÉCNICA Y LAS DIRECCIONES DEL CENTRO DE SERVICIO:

Para cualquier pregunta, comentarios o para obtener la dirección de su centro de servicio más cercano, SÍRVASE LLAMAR A NUESTRO "TELÉFONO
DE EMERGENCIA" GRATUITO AL 1-800-233-0268, DE LUNES A VIERNES, DESDE LAS 8 DE LA MAÑANA A LAS 4 DE LA TARDE, HORA DEL
ESTE.
Cuando llame, refiérasa al nombre y número de modelo del producto

Departamento de Servicio para Equipos • 300 Confederate Drive Franklin, TN 37065-0569

¡POR FAVOR, NO ENVÍE EL PRODUCTO A ESTA DIRECCIÓN!

Para más información, por favor visite nuestro sitio web: www.Laskoproducts.com

Figure 1

16’’

Advertising