Getting started – LG C1200 User Manual

Page 11

Advertising
background image

C1200 User Guide

21

Getting started

C1200 User Guide

20

Installing the SIM card and the handset battery

1. Make sure the power is off before you remove the battery.

Press the battery release latch up and remove the battery from
the phone at a 45 degree angle.

2. Insert the SIM card into the holder. Slide the SIM card into the

SIM card holder. Make sure that the SIM card is inserted properly
by ensuring that the gold contact area on the card is facing
downwards. To remove the SIM card, press down lightly and pull
it in the reverse direction.

3. Position the lugs on the bottom of the battery into the retaining

holder. Then, push the top half of the battery into position until the
latch clicks

Caution

The metal contact of the SIM card can be easily damaged by
scratches. Pay special attention to the SIM card while handling.
Follow the instructions supplied with the SIM card.

Note

Removing the battery from the phone when the power is on may
cause the phone to malfunction.

To insert the SIM card

To remove the SIM card

Charging the battery

Only use the mains adapter supplied with your phone.

1. With the battery in position on the phone, connect the lead from

the travel adapter to the bottom of the phone. Make sure that the
arrow on the lead connector is facing towards the front of the
phone.

2. Connect the other end of the adapter to the power outlet.

Caution

Use of unauthorised accessories could damage your phone
and invalidate your warranty.

Do not force the connector as this may damage the phone
and/or the mains adapter.

Getting started

Advertising