Linksys EFG120 - Manual (Page 40)

33 Chapter 5: Configuring the Network Attached Storage
The Administration Tab - Advanced - Backup
EtherFast Network Attached Storage (120GB with PrintServer)
The Administration Tab - Advanced - Backup
Use this screen to back up data on the Network Attached Storage. You can also back up or restore the
configuration file for the Network Attached Storage.
Backup Settings
Data Backup
Enable data backup from Disk 1 to Disk 2. If you have two disk drives, then you can have Disk 1 data backed
up on Disk 2. If you want to use this feature, click the checkbox.
Backup Time. To have the data backup performed on a regular basis, select the day and time you want the
backup to occur.
Click the Start Backup Now button to immediately start the backup process. (You must have Enable data
backup from Disk 1 to Disk 2 already selected.)
Config Backup
The configuration file contains all network information, as well as the User, Group, and Share information. It does
NOT include any information about the files stored on the Network Attached Storage.
Click the Download button to back up the configuration file of the Network Attached Storage on a computer.
Click the Upload button to restore the configuration file that you had previously saved to a computer.
Click the Save button to save any changes. Click the Cancel button to cancel all changes. Click the Help button to
get more information about this screen.
Figure 5-17: Administration Tab - Advanced - Backup
IMPORTANT: Uploading/restoring the configuration
file will overwrite and destroy any existing
configuration.