Lindy 25004 - Manual (Page 14)

User Manual English
5.12 LACP
Similar to static port trunking, LACP provides another way to dynamically aggregate a
port to a group (trunk) according to IEEE 802.3ad. Once the protocol is enabled, the
ports to be trunked by LACP will be executed automatically after pressing “apply”. An
example diagram is shown below:
Protocol Enabled: To enable/disable LACP protocol for a port.
Key Value: A number (1~255) to identify the LACP group for a port. All member ports
in a LACP group have the same key values. A Key number will be automatically
generated if the “auto” value is set
Choose and click the trunk ports you want to group. For example, select port 5,6,7
and port 8 to group into an LACP group with key value “auto”. Then press “Apply” to
activate the setting. An example diagram is shown below: