Liebert Cooling System XDV - Manual (Page 35)

Piping
29
Figure 32 Piping mains without Liebert XDV and Liebert Flex Pipe
11. Repeat Steps 8 through 10 for the return coupler (larger coupler).
12. Carefully lay the Liebert Flex Pipe on the top of the Liebert XDV.
NOTICE
Risk of permanent damage to the flex pipes. Do not fold or bend flex pipe tightly.
13. Carefully unbolt the Liebert XDV from the cabinet or hanging bracket, if applicable.
14. With the help of another person, carefully lower the Liebert XDV from the cabinet or hanging
bracket onto a stable surface.
6.11 Insulation
To minimize the possibility of condensation, insulate all piping between the Liebert XDV and the Lie-
bert XDP or Liebert XDC.