La Crosse Technology WS-8010U - Manual (Page 7)

7
English USA
French F
Italian I
Dutch NL
Danish DK
Spanish E
Japanese J
German D
4. Press the SET button to confirm, and to advance to the 12/24 hour setting
mode.
VI. 12/24 HOUR SELECTION
1. Press the SET button five times to enter the 12/24 hour selection mode.
2. The default setting of “12h” will flash in the TIME DISPLAY.
3. Press the + button to select either “12h” (AM/PM mode) or “24h” (military
time) time display.
4. Press the SET button to confirm, and to advance to the
°F or °C selection.
VII. SELECTING
°F OR °C
1. Press the SET button six times to enter the
°F or °C selection mode.
2. Press the + button to change from the flashing default setting “
°F” to “°C.”
3. The temperature displays change simultaneously as
°F or °C are selected.
4. Press the SET button to confirm, and to advance to the World Time setting.
VIII. WORLD TIME SETTING
Note: The World Time allows you to set a second time, enabling you to keep track
of the time in another part of the world. When setting the World Time, it is only
possible to set the hour—the minutes will correspond to the current local time.
“WORLD” will appear above the time in the TIME DISPLAY when this mode is
being set.
1. Press the SET button seven times to enter the World Time setting mode.
2. Press the + button to select the hour.
3. Press the SET button to confirm the World Time, and to advance to the
World/Local Time Display Setting.
Note: The mention of “local time” refers to your current local time, and is
meant to distinguish between world time and your time. Unless WWVB signals
have been received, it is important to remember while setting the World/Local
Time display that you have not yet set the local time and will not appear as the
correct time.