Logitech Wireless BH870 - Manual (Page 28)

BH870 Wireless Bluetooth® Headset User’s Guide 28
The USB Bluetooth Adapter and Travel Charger are included with the BH870 Headset. They are available as accessories. This section
explains how to use the USB Bluetooth Adapter. See also 3. Product Overview for detailed diagrams.
9.1 USB Bluetooth Adapter Diagram
1. Activity indicators (LEDs)
2. USB plug
3. Multifunction button
Figure 18:
LINK350
2
1
3
USB Bluetooth Adapter
9.2 Purpose of the USB Bluetooth Adapter
The USB Bluetooth Adapter connects to your computer and communicates with your headset via Bluetooth wireless technology. It
provides the following features:
- Basic Bluetooth wireless technology connection
- Softphone control
- Wideband audio
- Headset configuration
Though it is also possible to pair your headset with any standard Bluetooth device — including Bluetooth PC cards — this type of
pairing provides only the basic connection (the first point listed above), and you may also experience compatibility issues. Softphone-
control, wideband audio and headset-configuration features require the USB Bluetooth Adapter.
9.3 Pairing the USB Bluetooth Adapter and Headset
The headset and USB Bluetooth Adapter are already paired from the factory. The procedure given below is only necessary if pairing is
lost.
To pair your Jabra GO headset and USB Bluetooth Adapter, do the following:
1. Attach the USB Bluetooth Adapter to your PC, and turn on the PC. (See also 4.4 USB Bluetooth Adapter Setup and Connections).
2. Put the USB Bluetooth Adapter in pairing mode by pressing and holding its multifunction button for about
2 seconds — until its blue pairing LED turns on and stays lit.
3. If your headset is currently turned on, turn it off by pressing and holding on its multifunction button for about 4 seconds — until its
LED gives three quick red flashes and then turns off.
4. Put your (powered-off) headset in pairing mode by pressing and holding its multifunction button for about 4 seconds — until its LED
lights a constant blue.
5. Place the headset close to the USB Bluetooth Adapter and wait for a few seconds. When pairing is successful, you will see the
following indicators:
- On the adapter: the LED flashes blue quickly 5 times and turns off.
- On the headset: the LED flashes blue 5 times and then turns off.
6. Your headset and USB Bluetooth Adapter are now paired and connected.