LG QM9800 - Manual (Page 4)

USING THE SCALE WITH THE PLATE
1. Remove the 4 green rubber plugs.
2. Fix the plate to the scale using the supplied locking nut. (See the illustration)
3. Press the ON/OFF key.
4. The display shows “8888”.
5. Wait until the display shows “0.00”. The scale is now ready for use.
6. Lay the baby on the plate and wait until the display shows its weight.
7. Press the ON/OFF key to turn the scale off, otherwise the scale turn off automatically
after 2 minutes without being used.
USING THE SCALE WITHOUT THE PLATE
1. When the baby can stand up on his own and does not weigh more than 20kg.
2. Remove the plate and keep the locking nut for future use.
3. Replace the 4 green rubber plugs.
4. Turn the scale on and wait until the display shows “0.00”.
5. Get the baby to stand on the scale to start weighting.
ERROR MESSAGES
1. “LO” indicates that the batteries are flat. Replace them.
2. “ERR” shows the weight is too much.
3. The scale is ready for use when the display shows “0.00”. If the instructions have not
been followed correctly, the display shows “ERR”.
MAINTANCE
- Cleans scale with a damp cloth.
- Being a precision instrument, the scale must be treated with due care.
- We guarantee accuracy and repeatability with a tolerance within 3%.