Lindy FireWire 800 - Manual

- 1 -
FireWire 800 3Ports PCI Host
1. Introduction
This FireWire800 3Ports PCI Host has IEEE P1394b / FireWire 800
2Ports and 1394a 1Port at PCI card to Transmit and Receive Data at 800/
400/ 200/ 100 Mbits/s. It provides a 32bit 33 MHz and 64bit 33MHz PCI
interface on the host side.
Apple Mac OS X v10.2.4 or newer support Built-in 800Mbps driver for this
card. Mac OS 8.6 – Mac X v10.2.3 just support Built-in 400Mbps driver for
this card.
1.1. Features
1.1.1. PCI Interface
=Compliant with PCI Specification, revision 2.2.
=Integrated PCI DMA engines.
=32 bit/33MHz and 64 bit/33MHz fully compliant PCI host interface.
1.1.2. IEEE 1394 ( FireWire 800 /400 /200 /100 )
o
On Board Power connector to have Extra power input from system
power supply
o
Supports data transfer rate up to 800 Mbps
o
Fully supports Provisions of IEEE P1394b Revision 1.33+
o
Fully Supports Provisions of IEEE 1394a-2000 and 1394-1995
Standard
o
One External 1394a-2000 Fully Compliant Cable Port at S400, S200,
S100 speed
o
Two Bilingual (9-pin) Cable Ports at S800 or S400b speed
o
Supports Plug and Play
1.2. Package Contents
=FireWire800 PCI card
=Y-type Power Cable
=This Users Manual