La Crosse Technology Weather Direct WA-1440U - Manual (Page 21)

Version 1.1 - 11/25/2008
Page 21 of 31
The Four SET modes are:
Set Mode 1 – Set LCD Contrast (1-8)
ƒ Press and Hold the “SET” Key until the Wireless Display
beeps to enter the SET mode
ƒ “CONTRST” and number (1-8) will display on the bottom of
the LCD
ƒ Press the “VOLUME +” Key to update the LCD Contrast
settings.
Lightest Contrast = “1”, Darkest Contrast = “8”
ƒ Press the “SET” Key to save the current settings and
advance to the next option
ƒ Press the “SET” Key to save the current settings and
advance to the next option
Set Mode 2 - Set Text Scrolling Speed (1-3)
ƒ Press the “SET” Key until “Scr” flashes at the top and “SET
SCROLL SPEED” scrolls across the bottom
ƒ The standard speed is set to “2”
ƒ There are four speeds available – “1” is the slowest and “4”
is the fastest
ƒ Press the “VOLUME +” Key to change the scroll speed.
ƒ Press the “SET” Key to save the current settings and
advance to the next option
Set Mode 3 – Factory Reset of Wireless Display

NOTE: It is not possible to re-register a previously registered Wireless Display
under a new account until the Wireless Display has been deleted from the user
account on
www.weatherdirect.com and a Factory Reset has been performed.

NOTE: Expansion Options that are Lifetime Upgrades are still active on your
Wireless Display even if you delete it from your user account on
www.weatherdirect.com or perform a Factory Reset. The selection of locations
and other custom settings will need to be performed again if the Wireless Display
is re-registered.

WARNING: The Factory Reset procedure will erase any registration and setup
information from your Wireless Display. You must register the Wireless Display
again with
www.weatherdirect.com to use it after a Factory Reset.