Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 105)

Issue 1 April 1997 99
Feature Descriptions
add hunt-group XX (XX is the hunt group)
■ On Page 1 of this form, add information in the following fields:
— Group Name — this name is used on other forms, so make it
unique
— Queue — enter y
— Group Extension — this is the telephone number guests and
employees use to access their messages; you will have one num-
ber for guest access and one number for employee access
— Group Type — enter ucd
— COR — enter a COR number
— Queue Length — enter the total number of voice ports
■ On Page 2 of this form, add information in the following fields:
— Message Center — enter audix
— LWC Reception — enter audix
■ On Page 3 of this form, add each voice port extension and name. You
must specify the maximum number of hunt group members and the
range of numbers.
add data-module XXXX (XXXX is the data interface extension number used to
connect the voice messaging data link to the server)
■ On this form, add information in the following fields:
— Type — enter procr-intf
— Physical Channel — enter 01
— Name — enter audix
— COS — enter a COS number
— COR — enter a COR number
— Maintenance Extension — enter an extension to use for
maintenance testing