Lenovo ThinkVision E54 - Manual (Page 22)

Installing the device driver in Windows XP
To install the device driver in Microsoft® Windows XP, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
XP operating system.
4. Open the
Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver and then click
the Next button.
11. Select “Install from a list or Specific location (Advanced)” and then click the Next button.
12. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”
folder.
15. Select E54 monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
20