Philips SLV5405 - Manual (Page 9)

9
EN
Troubleshooting
Problem Tip
The video sources
do not respond to
the remote
control commands
from TV3
•
Point the remote control directly
to the receiver (A).
• Replace the batteries of the
remote controls with new ones.
•
Install the remote control blaster
cord. See the user manual of the
Wireless TV Link.
•
The maximum operating distance
of the remote control is 5 m.
The image of the
video source dis-
appears on TV3
•
Turn off the auto standby mode
of the video source. See its user
manual.
•
Follow the instructions to recon-
nect the video sources. See the
quick start guide.
Buzzing sound
when you use the
remote control.
•
Slightly change the position of the
receiver or the transmitter until
the buzzing sound stops.
• Sometimes it is not possible to
solve the problem.
Black and white
image with S-VHS
VCR.
•
Check if the SCART connector of
the S-VHS VCR gives signal in
CVBS. See its user manual.