Remote operation, 4 operating from a remote location, Operating from a remote location – Panasonic KX-FP205AL User Manual

Page 36: 4 operating from a remote location

Advertising
background image

7. Answering Machine (KX-FP215 only)

36

Remote Operation

7.4 Operating from a remote
location

Important:

L

Program the remote operation ID beforehand
(feature #11 on page 39).

L

Set the unit to TAM/FAX mode before going out
(page 27)
.

L

Use a touch tone telephone for remote
operations.

7.4.1 Summary of remote operation

1

Call your unit.

2

Enter the remote operation ID during or after the
TAM/FAX greeting message.

3

When there are new recorded messages

1. A long beep will sound.

2. Short beep(s) will sound up to 8 times.

L

This indicates the number of new messages.

3. New messages will be played back.

When there are no new messages
A short beep will not sound.

1. Wait for 4 seconds or press {5}.

2. All the recorded messages will be played back.

4

To end remote operation press {9}, then hang up.

Note:

L

When the voice memory is full, 6 beeps will sound
after playing back the recorded messages. Erase
any unnecessary messages.

7.4.2 Remote operation using remote
commands

1

Call your unit.

2

Enter the remote operation ID during or after the
TAM/FAX greeting message.

3

Enter a remote command within 10 seconds.

Note:

L

When you press a key, press firmly.

*1 If pressed within the first 5 seconds of a message,

the previous message will be played.

*2 To resume operation, press a command key within

10 seconds, otherwise the marker message
recording will start.

Recording a marker message
After playing back the messages, you can leave an
additional message.

1. Wait for 3 beeps indicating the end of the remote

operation.

2. Hear 1 beep.

3. Wait about 10 seconds.

4. Hear the voice guide and/or hear 1 beep.

5. Leave a message.

To turn ON the auto answer setting

1. Call your unit and wait for 10 rings.

L

A beep will sound.

2. Enter the remote operation ID (feature #11 on page

39) within 8 seconds.

L

The auto answer setting will be turned ON. The
receiving mode will be set to TAM/FAX.

3. Hang up the handset.

Key

Remote command

{

1}

Repeats a message (during
playback)

*1

{

2}

Skips a message (during playback)

{

4}

Plays new messages

{

5}

Plays all messages

{

7}

Records greeting message

{

9}

Stops current operation

*2

{

0}

Turns OFF auto answer setting

{*}{

4}

Erases a specific message (during
playback)

{*}{

5}

Erases all messages

{#}

Skips the greeting message

FP205-215AL-PFQX2516ZA-en.book Page 36 Thursday, July 13, 2006 9:31 AM

Advertising
This manual is related to the following products: