Polaris 120 XC SP - Manual (Page 83)

A--64
MAINTENANCE
Handlebar Adjustment
S
Slide the handlebar pad
upward to access the ad-
juster bolts. If additional
room is required, unzip
one of the handlebar pad
zippers and roll the pad to
the side.
S
To adjust, remove the up-
per flange nut and car-
riage bolt.
S
Loosen the lower flange
nut only enough so the
bracket can move freely.
S
Position the handlebar to
the desired height and
re-install the upper car-
riage bolt and flange nut.
S
Torque the flange nuts to
15-17 ft. lbs.
S
Reinstall the handlebar
pad.