Pelco DX1104-080 - Manual (Page 14)

14 C617M-A 8/04
3. Use the Search (<</>>) buttons to move around within the menu. Highlight Alarm Output and press the Play/Pause button to select. The
Alarm Output menu appears.
4. Use the Search (<</>>) buttons to highlight the fields for starting and ending times. When you highlight a field, use the number buttons to
enter the time. The starting and ending times refer to the hour. Enter two digits. Enter the hours in 24-hour format. For example, enter 08 for
8 a.m. and 15 for 3 p.m.
At the bottom of the screen is a bar that shows the hours when the alarm output will be enabled. Red means enabled and white means
disabled.
5. Use the Search (<</>>) buttons to highlight Automatically Enable Alarm Output, and then press the Play/Pause button to toggle between
On or Off.
6. When you finish, use the Search (<</>>) buttons to highlight Quit, and then press the Play/Pause button to select. The Setup Menu appears.
TIP: Pressing the Stop button also returns you to the Setup Menu.
7. Use the Search (<</>>) buttons to highlight another menu item in the Setup Menu and then press the Play/Pause button to select it, or
highlight Exit and then press the Play/Pause button to end the programming session.
On
ALARM OUTPUT
Enable Alarm Output: 00
Disable Alarm Output: 24
Automatically Enable
Alarm Output:
Quit