Important safety instructions for battery chargers – Porter-Cable 8101214 User Manual

Page 5

Advertising
background image

5

When using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. The following table shows the correct size
to use depending on cord length and nameplate ampere rating. If in doubt, use the
next heavier gage. The smaller the gage number, the heavier the cord.

Recommended Minimum Wire Size for Extension Cords

Total Length of Cord
25 ft.

50 ft.

75 ft.

100 ft.

125 ft.

150 ft.

175 ft.

7.6 m

15.2 m

22.9 m

30.5 m

38.1 m

45.7 m

53.3 m

Wire Size AWG
18 18

16

16

14

14

12

FUNCTIONAL DESCRIPTION

Figure A

1. Trigger Switch

2. Forward/Reverse Button

3. Torque Adjust Collar

4. Dual Range Gearing

5. Keyless Chuck

6. Bit Holder

7. Battery

8. Battery Release Button

9. LED Work Light

8

1

0

1

2

1

4

3

1

2

4

5

A

6

8

7

9

LI-ION Battery Packs and Chargers

Battery: LI-ION 18V

Charger: LI-ION

PC18BL

PC18BLX

PC18BLEX

PCLMVC

PCXMVC

Description Cat. #

NI-CD Battery Packs and Chargers

This product can accept any of the batteries and chargers listed in the chart below.

Battery: NI-CD 18V
Charger: NI-CD

PC18B

PCMVC

PCXMVC

Description Cat. #

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY
CHARGERS

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for
battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery

pack, and product using battery pack.

Shock hazard. Do not allow any liquid to get inside charger.

Burn hazard. To reduce the risk of injury, charge only designated

PORTER-CABLE batteries. Other types of batteries may burst causing personal injury

and damage.

Under certain conditions, with the charger plugged in to the power

supply, the charger can be shorted by foreign material. Foreign materials of a
conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup
of metallic particles should be kept away from charger cavities. Always unplug the
charger from the power supply when there is no battery pack in the cavity. Unplug
charger before attempting to clean.

:

:

:

90550129 PC1800D 4/1/09 2:38 PM Page 5

Advertising
This manual is related to the following products: