Panasonic EB-X800 - Manual (Page 31)

28
Basic Operations
Emergency call
To make an emergency call, the antenna ( p ) must be present.
1. Enter the local emergency number (such as [AAS]) 7 [q]
Sending service command to network
You can activate particular services such as mobile prepay and chat
by sending a service command, which may be called USSD
commands.
1. First, contact your service provider for the proper service
command code.
2. Enter the supplied service command code. If the phone
recognises it as a supplementary service or USSD request,
[5] (Send service comm.).
Answering calls
When there is an incoming call, the phone rings, flashes green and/
or vibrates (depending on your phone setting).
While the phone is ringing and/or vibrating:
1. When the phone is closed: Open the flip
When the phone is open: [q]
OR
If Anykey answer is on:
1. Press any key except [6], [w] or [,]
(See Anykey answer setting on page 46.)
Note: You can call the local emergency number even if the keys are locked.
Most countries support the international emergency number 112. If you find
the number does not work on your phone, please call your service provider.
Making emergency calls without a SIM is country or network operator
dependent.